Bootable Windows 8 Off USB
Microsoft is looking to make their OS more portable. With Windows 8, one of the features the Redmond, Washington company is introducing is a bootable OS off USB. True, we’ve seen both Windows and Linux distributions bootable off a flash drive before, but what makes this different is 1) it’s legal and 2) officially supported. This is a smart move to keep Microsoft positioned as a strong option as virtual desktop and thin client systems continue to rise in popularity.
Many power users already run virtual laptops off USB flash drives, enabling them to work on a single consistent environment at both home and work without fussing with a laptop or briefcase. An official bootable Windows 8 USB version should cement this concept and help Microsoft move towards more secure OS options comparable to VPMs.
With an official version of bootable Windows OS on USB, IT managers could now use a Nexcopy USB Duplicator to mass-produce their installation and/or restore media in a much faster time frame than using an old-school optical duplicator.
An additional caveat of the portable Windows system is the speed of the environment. Granted, there is nothing like running off a hard disk, but running off NAND flash will be almost as smooth… and with memory performance getting better with USB 3.0 flash drives, it will soon become virtually the same experience.
Video of Bootable Windows 8 running on a MacBook Pro via USB after the jump:
Source: EverythingUSB
Bootable USB Drive Articles on GetUSB.info
GetUSB.info has published several articles and tutorials related to bootable USB drives, covering setup guides, troubleshooting tips, and reviews of popular utilities. Below is an overview of their most useful content.
Bootable USB Guides on GetUSB.info
- Ultimate Boot CD from a USB Pen Drive: A tutorial explaining how to make the Ultimate Boot CD boot from a USB flash drive by formatting, extracting, and using Syslinux to make it bootable.
- How To: Check if My USB Flash Drive is Bootable: A step?by?step walkthrough using Windows tools to verify whether a USB is configured with boot?code/MBR.
- Make USB Flash Drive Bootable in Anything: A review of using Ventoy, an open?source tool for making a USB drive bootable with ISO, IMG, VHD, and EFI files, supporting multi?boot and persistence options.
Other Related Articles
- Review of Rufus Utility: Explains how Rufus writes bootable ISO files to USB and clarifies common misunderstandings.
- USB Boot Troubleshooting: Tutorials about BIOS boot order issues, clearing boot code from USB drives, and proper formatting steps.
Summary Table of Bootable USB Articles
| Topic | Published On | Highlights |
|---|---|---|
| Boot Ultimate Boot CD from USB | 2006 | Hands-on guide using Syslinux and ISO extraction to create a bootable USB version of the Ultimate Boot CD. |
| Check if USB is Bootable | July 2020 | Methods using Windows Disk Management to verify MBR/boot code on a USB drive. |
| Make USB Bootable Using Ventoy | 2022 | Multi?boot support, handles ISO/IMG/VHD/EFI files, no need to reformat for new images. |
| Review of Rufus Utility | 2021 | Explains how Rufus writes bootable code and compares it with other tools for ISO installation. |
| USB Boot Troubleshooting | 2021–2022 | Guides for BIOS issues, clearing bootstrap code, and proper bootable USB formatting methods. |
For more tutorials, reviews, and troubleshooting guides on creating and using bootable USB drives, visit GetUSB.info.
In a jelly battery the jelly would replace the liquid electrolytes currently used in most lithium batteries. University of Leeds dreamed up a very unique solution to our never-ending-quest for more battery power.
A new prototype of battery, the jelly battery, avoids what the pros call “thermal runaway.” The thermal runaway is what causes batteries to over heat and [sometimes] catch on fire.
The Leeds research team says their secret to success lies in the blending of a rubber like polymer with a conductive, liquid electrolyte into a thin, flexible file of gel. That film sits between the battery electrodes.
Nothing official from either company in regards to specs or a simple introduction, nor does the high-capacity USB 3.0 stick appear on Display Taiwan’s trade show website. So adding this all up, it could be nothing more then a USB case and a trade show hottie giving out false information.
If you watch the video [
The USB Implimentors Forum announced the availability of the USB On-The-GO [OTG] specification for embedded USB host controller applications where a PC is not required.
The supplement ensures that mobile devices such as phones or cameras are able to use a SuperSpeed USB link in both USB host and USB peripheral roles through a single receptacle. OTG and Embedded Host Devices requiring fast synchronization or streaming of rich data will benefit from this feature.
The USB OTG 3.0 and Embedded Host supplement offers power saving features equivalent to those available in USB OTG 2.0, enabling the adoption of SuperSpeed USB in mobile devices. Additionally, USB OTG 3.0 provides backward compatibility with USB OTG 2.0.
To learn more about the specification,
One of the main goals for Windows 8 with respect to peripheral support, is the robust support for USB devices. From the first 1.1 standard, the high speed 2.0 standard and the newest addition of SuperSpeed USB 3.0.
Microsoft expects to see all new PCs have a USB 3.0 port by 2015…but I think we’ll see USB 3.0 in all PCs before the end of 2013. Microsoft also forecasts a number of 2 billion USB 3.0 devices to ship in 2015 as well.
Microsoft’s game plan is keeping their current USB stack for 1.1 and 2.0 devices as it’s proven and stable, while incorporating a new USB stack for 3.0 devices.
Lets ditch the AC/DC power block with most laptops and just plug into one of those USB wall mount power stations. Or recharge your laptop directly off your tower PC. Or easily power an unlimited number of USB devices via your USB laptop USB 3.0 port.
This means more and more peripherals will be powered via USB and not require the extra power adapter. This ultimately mean less cost and less hassle for the average computer user.
Step 1: Get your items. Dice, USB, Dremel, blue or epoxy and a file.
Step 2:Â After some measurements, mill out the hold where the USB will be inserted.
Step 3: Repeat step 2 for the second die as this will be your cap. You also need to drill a hole on a dice side for the lanyard which will attached to your key-chain
Step 4: Epoxy the USB drive into the base die, and attached the lanyard to the cap die. Now you’ve got a USB dice key-chain.
You might want to take things a step further and
First off, lets get some pricing out of the way. The download update is retail at $30. The