Did you buy one of those ultra-thin laptops and fall in love with the lightweight design, sleek form factor, and powerful processor—only to realize you can’t use its full potential because it lacks the ports you need? A 9-in-1 USB-C hub solves that problem, giving your laptop desktop-like connectivity.

A USB-C hub allows you to connect a monitor, speakers, headphones, SD cards, and even a 10Base-T Ethernet cable at home. A hardwired Ethernet connection is especially useful, but the ability to connect a spare VGA monitor for a second screen is equally valuable.

The 9-in-1 hub is compact, lightweight, and well built. It consists of a wedge-shaped aluminum tube, with the taller side housing the video ports. A circuit board is suspended inside using plastic inserts that also align and cover the port openings. The two end caps are press-fit into the aluminum body without adhesive. If the device were dropped and came apart, it would be easy to snap back together.

Evaluating product quality often requires taking it apart. This hub disassembles easily by removing the plastic cap over the Ethernet port, allowing the internal board to slide out effortlessly. The cap on the cable end can also be removed, though it is not required for board access. The USB-C cable is connected via a displacement-style connector and secured with adhesive. The cable shielding is ungrounded, which adds minimal functionality, but the short cable length helps preserve signal reliability.

Most major components, aside from the DAC, are older parts from reputable manufacturers. Two of the four USB-C high-speed lanes are assigned to USB data, while the remaining lanes are allocated to DisplayPort. As a result, USB operates without compromise, but DisplayPort bandwidth is limited to two lanes. This means higher-bandwidth modes such as 4K at 60Hz are not supported. The onboard 3A DC converter should provide sufficient power for all components, assuming only low-power USB devices are connected simultaneously.

• The USB hub supports up to 2.4A fast charging for a single device; however, the hub is limited to 3A total, so charging multiple devices at high speed is not possible.
• The HDMI output is limited to HDMI 1.4, but all non-3D display modes within the specification are supported.
• VGA output supports both widescreen 1080p (16:9) and UXGA (4:3).
• The card reader supports simultaneous use of microSD and full-size SD cards.
• The 2-channel DAC requires HDMI audio input and converts HDMI audio to analog stereo output.
• Ethernet supports link detection and Energy Efficient Ethernet (EEE) to reduce power consumption when idle and during operation. Shorter Ethernet cables may also reduce heat. Wake-on-LAN features are supported.

When compared to the OEM Microsoft Surface Dock, which typically costs around $200, the value difference is significant. This USB-C hub offers strong value at around $30 at the time of this post.

View all articles related to USB hub products published by GetUSB.info.