Doing some research for why some HP computers do not boot from a USB flash drive, I came across Ventoy.

Ventoy is a software tool to create a USB flash drive bootable in anything and supports the most common image files.

We tried Ventoy to make a USB flash drive bootable, and it works like a champ. In fact, the software is so easy to use, it is worth commenting about a previous post we did. A while back we talked about how to check if your USB flash drive is bootable, and to be honest, rather than putting in the time and work to read the article and do the steps, your time is better used flashing your drive with Ventoy. The result is a bootable USB flash drive for any device.

Ventoy is an open source tool for creating bootable flash drives when using image files like ISO, IMG, WIM, VHD and EFI files. The project team tested over 900 image files which tested successfully on over 90% of the distro packages.

What we like about this solution is no need to flash the drive with boot code using the source CD-ROM like so many tutorials out there (for Windows at least) because the Ventoy tool creates a second partition which all the boot code and the Ventoy utility flashes that partition with the boot code needed. You can see from the Disk Management screen shot below there are now two partitions on the tested flash drive.

You can tell there have been plenty of Ventoy updates and what is (also) very nice about their software tool is the display of Ventoy version on your device. Nice feature to cross reference if your device is current or needs an update. The update process is just as quick as the original creation of the bootable device.

Considering the above, it goes without saying it is easier than ever to make a USB flash drive bootable in anything without having to re-do the work. This software eliminates the need to re-create a bootable image to USB and flash it over and over. Simply update the image file content, not the boot strap code.

The only thing even slightly annoying, which is easy enough to correct is the Volume name for the primary partition defaults to “Ventoy” Would be nice if an edit feature was in the software to customize this without the additional step of renaming the volume after-the-fact.

Here are a list of feature copied from the website. The project is open source and we suggest making a donation if you do in-fact use the code. It’s only fair, right!