You’ve connected a USB flash drive, heard the familiar Windows sound of connection, yet no drive letter shows up. You then go into Disk Management for Windows and you can see the device and memory, but no drive letter.

What should you do?

Most times this process is automatic and Windows will asign a drive letter to any storage device connected to your PC, whether it be a USB stick or a USB hard drive, or any other mass storage device.

However; in the event a drive letter isn’t assigned there is a very quick way to get your computer back to working the way it should.

1. Open Command Prompt as Administrator (search for CMD and right click to open as Admin)
2. Type ‘diskpart’ and hit Enter.
3. Once in the DISKPART type automount enable and click Enter.

If the above doesn’t do the trick, another issue may be at hand. Maybe some conflicting registry entries from past USB devices connected to the PC and for this reason the automount was disable, or no longer working properly.

Nexcopy has a registry cleaning tool specifically design for USB devices connected to your computer. This utility is an exe file that does not require installation and does not have spyware, malware or anything else. It’s from a company you may