Instructables member TLevis posted a cool tutorial on making a webcam controller from a 3D printer. Since 3D printers are all the rage right now, lets spread the word. It’s a cool design, but overlooks the ability to move the camera up and down…as it only rotates left and right. Read up on the tutorial […]
Instructables has a nice USB LED lantern DIY project. I think the most important part about this project is getting a cool enough looking lantern. Make sure it’s 50s-60s style with some wear on ti. For the full instructions go to the Instructables page.
Looking to for a simple DIY project for a school report or class event, this USB charger is it! Or if you’re just looking to try your hand with some simple electronic wiring to see if you have what it takes. Well, using some off-the-shelf times, a battery and the simple schematics below you can […]
These days it’s popular to take just about any house hold item, a USB flash drive, and mill out a space to make a USB mod case. Today’s post is no exception. Using just two dice and a mini USB, in four easy steps you can make a USB dice key-chain. Step 1: Get your […]
Not everyone keeps their flash drive on a key-chain or in their pocket. For many, using a ultra slim USB flashdrive and sticking it into your wallet is your form of portability. For those who do this, read on for a good DIY to insure the stick doesn’t get lost. First off, if you are […]
Sifting through the Instructables website I came along this retro looking USB spinner wheel or Jog wheel. The USB tutorial project is a bit complicated and requires some technical know-how, so if you are looking to increase your mod skill sets, this might be the project for you. So what is something like this good […]
USB keyloggers are always a good idea to have around. Sure you could make the argument that it’s incroaching on someone’s space, or that it’s flat out illegal to track someone without them knowing…but forget all that. To many ups sides. What about keeping check with your kids? Or making sure employees are keeping honest? […]
Do you see something odd about this picture? Maybe the fact an LED is illuminating from a USB connector with no PC in site? Ya that’s it. Good job Sherlock. So what we have here is a How To or USB Hack on running an LED from a Super-capacitor. If you are non-technical, then we […]
I think we can all agree there are not enough USB laser ducks out there. To help solve this problem we came across a nice USB laser duck tutorial to take any rubber ducky and turn it into a zombie, creepy laser duck. I don’t think Ernie will be to pleased to hear the news. […]
Yesterday we spoke about Elcom introducing a USB power strip and today we have USB Fever with a solar powered USB hub. We where very excited to hear about this product - as it seems to be a step up from the introduction from yesterday, and it’s got some great features, but unfortunately, the solar […]
I’ve seen some USB holders at Staples and Office Max for over $20 dollars and that’s just for a fancy pouch to place your USB sticks while on-the-go. What about a DIY duct tape USB holder? You get the satisfaction of making it yourself, save yourself some cash and a hint of coolness to your […]