The first couple of times I connected a USB drive to my computer it was nice to see the pop-up window asking me what I wanted to do with the drive.第一夫妇的时候，我连的USB驱动器，以我的电脑，这是尼斯看到弹出式窗口问我，我想做的事，与驱动器。 However, the pop-up window gets old. Here is how to disable the autoplay pop-up window for USB drives :但是，弹出式窗口得到岁。 这里是如何禁用自动弹出式窗口，为USB驱动器 ：

Go to your Windows Start button and navigate to RUN… type in:转到您的Windows的开始按钮，并浏览至运行…类型：

gpedit.msc then click OK gpedit.msc然后单击确定

A Windows Group Policy window pops up.一个Windows组策略窗口的持久性有机污染物。 This is where you configure the pop-up window setting.这是您配置弹出式窗口的设置。

Click the Administrative Templates folder, then click the System folder .单击管理模板文件夹，然后按一下系统文件夹 。

On the right side of the window you will see (may have to scroll down) the “ Turn Off Autoplay ” item.在右边的窗口，您会看到（可能需要向下滚动） “ 关闭自动播放 ”项目。 Double click that item.双击该项目。

Another window pops up and this is where you enable the turn-off autoplay pop-up window dialogue box .另一个窗口弹出，这是您启用之交小康自动弹出式窗口对话方块 。 Simply click the radial button for “ Enable ” now select “All drives” or “CD-ROM drives”   Click OK or Apply and you’re set.只要按一下按钮，径向为“ 启用 ”现在选择“所有驱动器”或“ CD - ROM驱动器” ，单击确定或应用和您设置。

Please note, this setting will also affect your CD-ROM autoplay function as well.请注意，此设置也将影响您的CD - ROM自动播放功能，以及。 I’d like to see the ability to select only USB devices, but that’s just not the case.我希望看到的能力，只能选择USB设备，但只是并非如此。

To reverse the setting, follow the above instructions and set the radial button to either “ Not Configured ” or “ Enabled ”要扭转设置，依照上述说明，并设置径向按钮，无论是“ 未配置 ”或“ 启用 ”

If using Windows Vista - the process is just a little easier. 如果使用Windows Vista -的过程，只是变得更轻松。 Go to your Start button, or Windows Logo and navigate to “ Dafault Programs ” here a pop-up window opens and click the link for “ Change AutoPlay Settings ” which then takes you to the following window to configure your autoplay settings for all your devices.转到您的启动按钮，或Windows徽标，并转到“ dafault程序 ”在这里一个弹出式窗口打开，并点击链接“ 的变化自动设置 ” ，然后带您到下面的窗口来配置您的自动设置您的所有设备。